2.2
Preparing Tools
Wire stripper
Solid wrench
Flat-head
screwdriver
Clamp meter
Heat gun
Insulation tape
2.3
Preparing Consumables
(Optional) Prepare firestop putty for sealing cable holes after cable connection. The fire retardant
bags are to be purchased by the customer.
Diagonal pliers
Insulated torque
wrench
Level
Cable tie
Hammer drill
Protective shoes
4
Crimping tool
Socket wrench set
Rubber mallet
Measuring tape
Protective gloves
NOTE
This table may not list some tools
required at specific sites. Onsite
installation personnel and technical
support personnel should prepare tools
based on site requirements.
Hydraulic pliers
Phillips screwdriver
Electrician's knife
Step ladder (2 m)
Insulated gloves