Toro SGR-6 Operator's Manual page 16

Figure 15
Changing the Engine Oil
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so that it drains better.
2. Park the machine on a level surface and engage
the parking brake.
3. Shut off the engine and wait for all moving parts
to stop.
g244086
4. Change the oil as shown in
5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
17).
g035136
16
(Figure 16).
Figure 16
g244099
g031623
(Figure