Emc, Emi, And Esd Standards Compliance; Ce Standard Compliance; Figure 9 Sample Safety Compliance Label - Nokia 7368 ISAM ONT E-240G-B Product Manual

ANSI ONU safety guidelines
4.2.1
The ONU equipment complies with the following requirements:
•
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
•
4.2.2
The E-240G-B meets the CE safety standards. Figure
compliance label, including the CE certification mark, on ONU equipment.
Figure 9
36
Release 06.01.01 | June 2019 | Edition 09

EMC, EMI, and ESD standards compliance

Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Class
B requirements
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is needed.
Consult the dealer or an experienced radio/TV technician for help.

CE standard compliance

Sample safety compliance label
3FE-46261-AAAA-TCZZA
7368 ISAM ONT E-240G-B Product Guide
9 shows a sample safety
Issue: 01