Huawei PowerCube 5000 Installation Manual page 82

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
Table 9-7 Setting the Network Param.
Path
Settings Wizard
Step 2 After the wizard setting is complete, the SMU accesses the main menu.
Figure 9-2 Main menu
Step 3 When the SMU is running properly, you can choose the following menus to change the MDU
language.
Issue 03 (2020-04-10)
Parameters
IP Address
Subnet Mask
Default Gateway
The parameter values in the figures are for reference only.
 If no button is pressed in 1 minute on any screen, the MDU touchscreen will turn off. The main
menu will be displayed if the MDU touchscreen is tapped again.
 You can tap the bypass, PV, load, or battery icon on the main menu to view the running information
about the corresponding component. You can also tap Common Functions or System Info to view
or set parameters.
 is the start/stop button used to control system output.
Copyright © Huawei Technologies Co., Ltd.
9 Power-on and Commissioning
Default Value
192.168.0.10
255.255.255.0
192.168.0.1
Setting
Set this parameter
based on the address
assigned by the
network
administrator.
Set this parameter
based on the address
assigned by the
network
administrator.
Set this parameter
based on the address
assigned by the
network
administrator.
76