5.
Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
Installable Drive Enclosures
For installable drive enclosures, refer to "Product List".
Drive Enclosure Handling Instructions
■
About Condensation
■
About Static Electricity
Do not uninstall or move a drive enclosure that is already installed.
•
Contact your sales representative or maintenance engineer if a drive enclosure needs
to be uninstalled or moved.
•
When installing the ETERNUS AF, secure the rack to the floor to prevent the rack from
moving out of place or from toppling over. For details on the rack installation require-
ments, refer to "Site Planning Guide".
When moving a drive enclosure from a cold place, such as an unconditioned store
•
house in winter, to a warmer place such as an air-conditioned room, the severe tem-
perature change may result in condensation forming.
To avoid this, allow the packed drive enclosure sufficient time in the warmer place
(one hour for each 15°C of temperature difference) to adapt to the new temperature.
When handling drive enclosures, wear a wrist strap or touch a metal part to discharge
•
the human body's natural static electricity. Failure to discharge static electricity may
cause failure in the ETERNUS AF.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
52
P3AG-1842-06ENZ0