Installing Long Wave Sfp+ Modules (16Gbit/S); Installation Rules For Long Wave Sfp+ Modules (16Gbit/S) - Fujitsu ETERNUS AF250 S2 Basic Operation Manual

5. Component Expansion/Function Enhancement

Installing Long Wave SFP+ Modules (16Gbit/s)

5
Click the [OK] button.
The Veeam Storage Integration license is registered.
6
Check the registration completion message and click the [Done] button.
The screen returns to the [Settings] screen.
7
Check that the license has been registered.
Confirm that "License" of "Veeam Storage Integration" has changed to "Registered" in the [Settings] screen.
Installing Long Wave SFP+ Modules (16Gbit/s)
The Short wave SFP+ module (16Gbit/s) in the host interface (FC 16Gbit/s) can be replaced with an optional Long
wave SFP+ module (16Gbit/s) for an ETERNUS AF.
This section explains the installation rules, handling instructions, and replacement procedure for Long wave SFP
+ modules.
Make sure to read "Safety Precautions" before performing replacement of Long wave SFP+ modules.
Make sure to turn off the ETERNUS AF before replacing SFP+ modules (16Gbit/s).
Contact your sales representative or maintenance engineer to replace SFP+ modules (16Gbit/s) during system
operation.

Installation Rules for Long Wave SFP+ Modules (16Gbit/s)

One or two Short wave SFP+ modules (16Gbit/s) in a host interface (FC 16Gbit/s) can be replaced with Long wave
SFP+ modules (16Gbit/s).
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
63
P3AG-1842-06ENZ0