SEN00912-02
Adjusting mirrors
1. Mirrors installed positions
2. Adjusting mirror (a)
Adjust mirror (a) so that you can see hatched
part (a') at the left rear end of the machine from
the operator's seat.
a Dimension of installed position and visibility
range
•
Dimension X2 of installed position: 75
mm
•
Visible range Z (Left): 3,700 mm
•
Visible range H (Height): 3,100 mm
•
Hatched part (a') must be seen.
a Loosen mirror mounting nut (1) and adjust
the mirror so that you can see (a') best.
26
3. Adjusting mirror (b)
Adjust mirror (b) so that you can see hatched
part (b') at the right rear end of the machine.
a Dimension of installed position and visibility
range
•
Dimension X1 of installed position: 220
mm
•
Visible range Y (Right): 2,000 mm
•
Hatched part (b') must be seen.
a Loosen mirror mounting screw (2) and bolt
(3) and adjust the mirror so that you can see
(b') best.
4. Adjusting mirror (c)
Adjust mirror (c) so that you can see hatched
part (c') at the front lower area of the machine.
a Dimension of installed position and visibility
range
•
Dimension X3 of installed position: 100
mm
•
Hatched part (c') must be seen.
a Loosen the mirror mounting screw and ad-
just the mirror so that you can see (c') best.
30 Testing and adjusting
PC800, 850-8