Method For Adjusting Mirrors; Procedure For Adjusting Machine Left Front Mirror (A) - Komatsu PC500LC-10R Shop Manual

30 TESTING AND ADJUSTING

METHOD FOR ADJUSTING MIRRORS

k
Be sure to adjust the mirrors before starting work. If they are not adjusted properly, you cannot se-
cure the visibility and will be injured or may lead to a serious personal injury or death.
k
The following conditions must be met before starting the work to prevent the machine from moving
during the work.
k
The machine is placed on a level ground.
k
The work equipment is lowered to the ground in secure posture.
k
The lock lever is in LOCK position.
k
The engine is stopped.
Mirror (A): Machine L.H. front mirror
Mirror (B): Machine R.H. front mirror
Mirror (C): Machine R.H. side mirror
Mirror (D): Mirror on counterweight

PROCEDURE FOR ADJUSTING MACHINE LEFT FRONT MIRROR (A)

k
To prevent the machine from moving during the work, make sure that the following conditions are
met before starting the work.
k
The machine is placed on a firm, level ground.
k
The work equipment is lowered to the ground in secure posture.
k
The lock lever is in LOCK position.
k
The engine is stopped.
Adjust the mirror so that the operator can see a person at the rear left of the machine.
1.
Adjust the mirror with your hand so that the side of the ma-
chine is reflected in the mirror as shown in the figure.
2.
Check that you can see a person at the rear left end of the
machine.
PC500LC-10R
METHOD FOR ADJUSTING MIRRORS
30-105