PowerCube 500 (CPS300-N18A1H)
User Manual
Figure 6-7 DC fuse
(1) Fuse
Procedure
Step 1 Put on the protective gloves.
Step 2 Record the port where the fuse should be replaced.
Step 3 Use a flat-head screwdriver to prize up the buckle on the quick connect terminal and remove
the terminal.
Figure 6-8 Removing a quick connector
Step 4 Use an insulated flat-head screwdriver to remove the old fuse, as shown in the following
figure.
Issue 02 (2019-08-30)
Copyright © Huawei Technologies Co., Ltd.
6 Component Replacement
54