Maintenance - DeWalt DC013 Original Instructions Manual

EN GLI SH
4. Repeat steps 2 and 3 to set the other memory
buttons.
TO PROGRAM THE CLOCK
1. Turn power on (see Power/Volume
Adjustment).
2. Push and hold clock button (e) until the LCD
display (g) begins flashing.
3. Press the appropriate arrow button (HR for
hour; MIN for minute) to adjust the time.
NOTE: If you do not press a button within
5 seconds, the clock programming feature will
automatically return to the previous setting.
4. Once the time is set, push and hold the clock
button until the time on the LCD display stops
flashing.
Important Radio Notes
1. The radio will run up to 8 hours on a single
battery charge using an 18 volt battery. Using
batteries of lower voltage will produce less run
time.
2. Reception will vary depending on location and
strength of radio signal.
3. Certain generators may cause background
noise.
4. AM reception will most likely be clearer when
powered by a battery pack.
5. To use the auxiliary port (k), plug the output jack
from a CD or iPod */MP3 player into the port
®
(fig. 1). The sound from the external source
plays through the speakers of the DC013.
6. The USB power output port (l) is a connection
port for powering low power devices such as
mobile phones, CD and MP3 players.
* iPod is a registered trademark of Apple Inc.

MAINTENANCE

Your D WALT radio has been designed to operate
E
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper care.
Service Notes
This product is not user serviceable. There are
no user serviceable parts inside the charger/
radio. Servicing at an authorised service center is
required to avoid damage to static sensitive internal
components.
28
Cleaning
WARNING: Never use solvents or
other harsh chemicals for cleaning
the non-metallic parts of the charger/
radio. These chemicals may weaken
the materials used in these parts. Use
a cloth dampened only with water and
mild soap. Never let any liquid get inside
the charger/radio; never immerse any
part of the charger/radio into a liquid.
CHARGER/RADIO CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the
charger/radio using a cloth or soft
non-metallic brush. Do not use water
or any cleaning solutions.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
been tested with this product, use of
such accessories with this charger/radio
could be hazardous. To reduce the risk
of injury, only D WALT recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
WALT, have not
E
WALT product
E