Download
Share
Print this page
PRx Performance Profile 90" Squat Rack with Multi-Grip Bar Manual
  1. Manuals
  2. Brands
  3. PRx Performance Manuals
  4. Fitness Equipment
  5. Profile 90" Squat Rack with Multi-Grip Bar
  6. Manual

PRx Performance Profile 90" Squat Rack with Multi-Grip Bar Manual

Hide thumbs Also See for Profile 90" Squat Rack with Multi-Grip Bar:

Advertisement

Quick Links

90" Profile® Squat Rack with
PRx Performance Retractable Wall Mounted Exercise Rack System, also known
as the Profile Rack and Profile PRO:
U.S. Patent No. 9,333,387
U.S. Patent No. 9,409,048
U.S. Patent No. 9,498,670
U.S. Patent No. 9,649,525
U.S. Patent No. 9,844,691
For further assistance and installation video:
prxperformance.com/pages/support

Advertisement

loading
Need help?

Need help?

Do you have a question about the Profile 90" Squat Rack with Multi-Grip Bar and is the answer not in the manual?

Questions and answers

Related Manuals for PRx Performance Profile 90" Squat Rack with Multi-Grip Bar

Summary of Contents for PRx Performance Profile 90" Squat Rack with Multi-Grip Bar

  • Page 1 90” Profile® Squat Rack with Multi-Grip Bar PRx Performance Retractable Wall Mounted Exercise Rack System, also known as the Profile Rack and Profile PRO: U.S. Patent No. 9,333,387 U.S. Patent No. 9,409,048 U.S. Patent No. 9,498,670 U.S. Patent No. 9,649,525 U.S.
  • Page 2 90” Profile® Squat Rack with Multi-Grip Bar All Parts & Tools Needed Rack Specifications (WxHxD) Folded Up: 52” x 108” x 11.25” Folded Down: 52” x 90” x 29.25” Weight Capacity: 1000 lbs Tools Needed Item No. Description Qty. 1/4” Wall Bracket Cordless drill Pro le Upright 2x3 3/16”...

  • Page 3: Getting Started

    Getting started 1. Assemble all the tools listed on page 2 and clear your working space. 2. Measure your ceiling height to ensure your wall space can accommodate the rack. 3. Recruit a work partner to assist with steps that require lifting and holding the rack. 11.25 29.25 108.00 88.00 19.00 support@prxperformance.com...

  • Page 4: Wall Bracket

    Attaching Wall Brackets Standard installation is designed for ceilings 108” or taller. If your ceiling is shorter than 108” please see page 10 for modifications, or contact PRx Performance. 52” 16” 16” 16” 69” 108” 88” 24” 24” 19” (701) 566-0452...

  • Page 5: Multi-Grip Bar

    Locate Studs 1. Profile® Squat Rack with Multi-Grip Bar is designed to be mounted to wood studs with standard 16” or 24” spacing, with or without drywall. 2. To mount your rack to a wall with non-standard stud spacing, please use a stringer board or email us at support@prxperformance.com. 3. PRx recommends professional installation for mounting the wall brackets to a block, concrete, or metal stud wall. 4. Use a stud finder to locate the rightmost stud where you intend to install the right side of your rack 5. Begin at the height of your lower bracket (19”). 6. With a stud finder, locate both the left and right edge of the stud and mark them with a pencil. 7. Mark the center of the stud between the edges with a pencil. 8. Find and mark the same stud at the height of the Wall Brackets (19” and 88”). 9. Locate and mark the remaining three studs in the same fashion. (If your studs are spaced 24”, you will locate only two more). Wall Bracket Helpful Tips 1. Bracket “ears” will point downward. 2. Bracket measurements are on-center (This means measure from the middle of the hole). 3. The distance between the two wall brackets is the MOST IMPORTANT measurement and should take precedence over the bracket distance from the floor (if there is a discrepancy). For the rack to stow properly, this measurement should be made precisely within a 1/4”. 4. Standard studs are spaced 16” apart and correspond with the four outside holes. The center hole is only used if studs are spaced 24”. 5. Pilot holes are REQUIRED. Not drilling pilot holes may result in broken lag screws. Pilot holes should be drilled 2 1/2” deep using a 3/16” drill bit to prevent broken lag screws.
  • Page 6 Linkage Arms to Wall Brackets 1. Place the small side of the Plastic Spacer (#9) in the straight, gas shock facing portion of unbent end of the linkage arm (as pictured below). 2. Place the linkage arm with the Plastic Spacer (#9) facing the inside of the wall bracket “ear”. 3. Attach using a 1 3/4” hex head bolt (#10) and 5/8” washer (#11) on the outside of the wall bracket “ear” and a 5/8” washer and 5/8” Nyloc Nut (#12) on the opposite side. 4. Tighten using a 15/16” socket and 15/16” wrench. *NOTE: DO NOT over tighten any of the pivot points. This may result in the rack feeling “stiff ” moving up and down. It should move up and down freely. 5. Repeat so all four linkage arms are attached to the wall brackets. *NOTE: DO NOT attach the shocks to the wall brackets at this point of assembly. (701) 566-0452...
  • Page 7 Attach Multi-Grip Bar To Uprights 1. Lay the uprights on the ground facing upward (with space between them for the Multi-Grip Bar). 2. Lay the Multi-Grip Bar (#4) flat on the ground between the tops of the uprights as shown below. The top of the uprights will not have a plastic plug. 3. Using a 3 1/2” hex head bolt (#14), two 5/8” Washers (#11), and one 5/8” Nyloc Nut (#12) connect the bottom hole of the Multi-Grip Bar to the third hole down from the top of the upright. Hand tighten then repeat with the next upright. 4. Attach the top of the Multi-Grip Bar to the upright using a 4” hex head bolt (#13), two 5/8” Washers (#11), and one 5/8” Nyloc Nut (#12). Hand tighten and repeat with the other upright. 5. Leave the top bolts loose, but tighten bolts in the bottom holes using a 15/16” open ended wrench and socket. The top bolts will need to be removed shortly in order to attach the rack to the linkage arms. 6. Team lift the rack into place (approximately 20” away from the wall), in order to begin attaching linkage arms. support@prxperformance.com...

  • Page 8: Flat Washer

    Attach Multi-Grip Bar and Linkage Arms Upper Linkage Arms 1. Attach the left linkage arm by removing the 5/8” x 4” hex head bolt (#13) from the top left pull up bar. Place the Plastic Spacer on the inside of the linkage arm and place it against the top hole of the upright. 2. Attach linkage arm, black plastic spacer, upright and Multi-Grip Bar using the 5/8” x 4” hex head bolt, (2) 5/8” flat washer (#11) and 5/8” Nylock Nut (#12). NOTE: DO NOT over tighten. 3. Repeat on the right side. Lower Linkage Arms 1. Place Plastic Spacer on the inside of the bottom linkage arms, place it against the 19” hole of the upright. Attach linkage arm, Plastic Spacer (#9) and upright using a 5/8” x 3 1/2” bolt (#14), (2) 5/8” washer (#11) and 5/8” Nylock Nut (#12) DO NOT ATTACH THE SHOCKS. 2. Repeat on the opposite side, being sure not to over tighten. (701) 566-0452...

  • Page 9: Flange Nut

    Attach Gas Shocks to Wall Brackets 1. *ATTENTION: TEAM LIFT the rack by holding each upright and pushing up against the wall. NOTE: The rack will be heavy. 2. Attach Gas Shocks to ‘ear’ of the wall bracket with the 5/16” Serrated Flange Nut (#8 already attached to the shock) and tighten using a 1/2” open-ended wrench and socket. 3. Repeat for all shocks. 4. Move the rack from the up position to the down position. It should move with ease. If it feels ‘stiff ‘, loosen the pivot points slightly until it moves more smoothly. That’s it! Please send a video or photo of your rack in action to sales@prxperformance.com when complete. We would love to see it! support@prxperformance.com...
  • Page 10 Wall Bracket Heights According to Ceiling Heights Standard installation is designed for ceilings 108” or taller. If your No PRx Folding Bench ceiling is shorter than 108”, please follow the appropriate table depending upon if you have a PRx Folding Bench. Ceiling Bottom Space...

  • Page 11: Limited Lifetime Warranty

    LIMITED LIFETIME WARRANTY This product is warranted by PRx Performance LLC, to the original user-owner only, against defective materials or workmanship for the lifetime of the product. During the warranty period, or “lifetime” of the product, at the discretion of PRx management, if the product is found to be defective, it will be repaired or replaced without charge.
  • Page 12 Refer a Friend: Share the GAINZ! You Both Win! Got a friend or family member who could use their own PRx Performance gym? Want the biggest discount we offer for your next order? Start referring today! prxperformance.com/refer (701) 566-0452...
Save PDF