Specifications - Yamaha NMAX Owner's Manual

Specifications

Dimensions:
Overall length:
1955 mm (77.0 in)
Overall width:
740 mm (29.1 in)
Overall height:
1115 mm (43.9 in)
Seat height:
765 mm (30.1 in)
Wheelbase:
1350 mm (53.1 in)
Ground clearance:
135 mm (5.31 in)
Minimum turning radius:
2.0 m (6.56 ft)
Weight:
Curb weight:
127 kg (280 lb)
Engine:
Combustion cycle:
4-strokeCooling system:
Liquid cooledValve train:
SOHC
Number of cylinders:
Single cylinder
9
Displacement:
155 cm
Bore × stroke:
58.0 × 58.7 mm (2.28 × 2.31 in)
Compression ratio:
10.5: 1
Starting system:
Electric starter
Lubrication system:
Wet sump
Engine oil:
Recommended brand:
YAMALUBE AT ELITE
SAE viscosity grades:
10W-40
Recommended engine oil grade:
API service SG type or higher,
JASO standard MA or MB
Engine oil quantity:
Oil change:
0.90 L (0.95 US qt, 0.79Imp.qt)
Final transmission oil:
Type:
Motor oil SAE 10W-30 type SE or
higher or Gear oil SAE 85W GL-3
Quantity:
0.15 L (0.16 US qt, 0.13Imp.qt)
Coolant quantity:
Coolant reservoir (up to the maximum
level mark):
0.25 L (0.26 US qt, 0.22Imp.qt)
Radiator (including all routes):
0.46 L (0.49 US qt, 0.40Imp.qt)
Air filter:
Air filter element:
Oil-coated paper element
Fuel:
Recommended fuel:
Regular unleaded gasoline
(Gasohol [E10] acceptable)
9-1
Fuel tank capacity:
6.6 L (1.7 US gal, 1.5Imp.gal)
Fuel reserve amount:
1.4 L (0.37 US gal, 0.31Imp.gal)
Fuel injection:
Throttle body:
ID mark:
2DP1 00
Spark plug(s):
Manufacturer/model:
NGK/CPR8EA-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Clutch:
Clutch type:
Dry, centrifugal, shoe
Drivetrain:
Primary reduction ratio:
1.000
Final drive:
Gear
Secondary reduction ratio:
10.208 (56/16 x 35/12)
Transmission type:
V-belt automatic
Chassis:
Frame type:
Underbone
Caster angle:
26.0 °
Trail:
92 mm (3.6 in)