Table of Contents
Advertisement
Removing and installing panels
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
1
2
1. Panel A
2. Panel B
Panel A
To remove the panel
1. Remove the bolts.
Periodic maintenance and adjustment
2
1
2
1. Panel A
2. Bolt
2. Extend the right passenger footrest,
and then pull the panel outward.
To install the panel
1. Place the panel in the original posi-
tion, and then install the bolts.
7-7
2. Retract the right passenger footrest
to its original position.
Panel B
To remove the panel
1. Remove panel A.
2. Remove the quick fasteners and the
bolt.
1
2
1. Panel B
2. Quick fastener
7
- Quick Links:
- Engine Oil and Oil Strainer
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the NMAX and is the answer not in the manual?
Questions and answers
How to make the NMAX V1 brighter than stock?
You can make the Yamaha NMAX V1 brighter than stock by upgrading to LED headlight bulbs, which provide brighter and longer-lasting illumination compared to stock halogen bulbs. Additionally, installing auxiliary lights such as LED light bars, spotlights, or fog lights can further enhance visibility, especially in low-light or adverse weather conditions. Upgrading to LED turn signal lights can also improve visibility for other road users.
This answer is automatically generated
@Mr. Anderson thanks, but can you tell how to change the Headlight to LED?