Table of Contents
Advertisement
Recommended lubricant:
Lithium-soap-based grease
Periodic maintenance and adjustment
Checking the front fork
The condition and operation of the
front fork must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
To check the condition
Check the inner tubes for scratches,
damage and excessive oil leakage.
To check the operation
1.
Place the vehicle on a level surface
and hold it in an upright position.
WARNING! To avoid injury, se-
curely support the vehicle so
there is no danger of it falling
over.
2.
While applying the front brake, push
down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
7-25
NOTICE
If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or re-
pair it.
7
- Quick Links:
- Engine Oil and Oil Strainer
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the NMAX and is the answer not in the manual?
Questions and answers
How to make the NMAX V1 brighter than stock?
You can make the Yamaha NMAX V1 brighter than stock by upgrading to LED headlight bulbs, which provide brighter and longer-lasting illumination compared to stock halogen bulbs. Additionally, installing auxiliary lights such as LED light bars, spotlights, or fog lights can further enhance visibility, especially in low-light or adverse weather conditions. Upgrading to LED turn signal lights can also improve visibility for other road users.
This answer is automatically generated
@Mr. Anderson thanks, but can you tell how to change the Headlight to LED?