Siemens Keypad With Graphical Display; Keypad Display; Using The Graphical Keypad - Siemens BT300 Applications Manual

Siemens Industry, Inc. • 8
2.1

Siemens keypad with graphical display

The graphical keypad features an LCD display and 9 buttons.
2.1.1

Keypad display

The keypad display indicates the status of the motor and the drive and any irregularities in motor or drive
functions. On the display, the user sees information about his present location in the menu structure and
the item displayed.
See the attached Keypad Navigation Map to get a comprehensive idea of the menu structure.
2.1.1.1 Main menu
The data on the control keypad are arranged in menus and sub-menus. Use the Up and Down arrows
to move between the menus. Enter the group/item by pressing the OK button and return to the previous
level by pressing the Back/Reset button.
The Location field indicates your current location. The Status field gives information about the present
status of the drive. See Figure 2.
Status field
STOP/RUN
ST OP
2.1.2

Using the graphical keypad

2.1.2.1 Editing values
Change value of a parameter following the procedure below:
3. Locate the parameter.
4. Enter the Edit mode.
5. Set new value with the arrow buttons up/down. You can also move from digit to digit with the arrow
buttons left/right if the value is numerical and change then the value with the arrow buttons up/
down.
6. Confirm change with OK button or ignore change by returning to previous level with Back/Reset
button.
Status field
READY/NOT READY/FAULT
ALARM
Direction
READY
Main Menu
ID: M1
Quick Setup
( 17 )
Monitor
( 5 )
Parameters
( 12 )
Figure 2. Main menu.
Control Place:
PC/IO/KEYPAD/FIELDBUS
I/O
Location field
(Parameter ID number and
current menu location)
Press OK to enter
Activated group/item:
Number of items
in the group
BT9159
24-hour support +1-800-877-7545 (Dial 2)
Keypad of the drive