Application Parameter Lists - Siemens BT300 Applications Manual

Siemens Industry, Inc. • 30
3.5

Application parameter lists

Find the parameter menu and the parameter groups as guided below.
STOP
Quick Setup
 

Monitor
Parameters

The application contains the following parameter groups:
Menu and Parameter group
Group 3.1: Motor settings
Group 3.2: Start/Stop setup
Group 3.3: Control reference settings
Group 3.4: Ramp & Brakes Setup
Group 3.5: I/O Configuration
Group 3.6: Fieldbus Data Mapping
Group 3.7: Prohibited Frequencies
Group 3.8: Limit supervisions
Group 3.9: Protections
Group 3.10: Automatic reset
Group 3.11: Timer functions
Group 3.12: PID-controller 1
Group 3.13: PID-controller 2
Group 3.14: Multi-pump
Group 3.16: Fire mode
READY Keypad
Main Menu
ID: M3
( 17 )
( 6 )
( 13 )
Table 22. Parameter groups.
STOP READY Keypad

Parameters
ID: M3.1
 Motor Settings
( 2 )

Start/Stop Setup
( 7 )

References
( 18 )
Description
Basic and advanced motor settings.
Start and stop functions.
Frequency reference setup.
Acceleration/Deceleration setup.
I/O programming
Fieldbus data out parameters.
Prohibit frequencies programming.
Programmable limit controllers.
Protections configuration
Auto reset after fault configuration.
Configuration of 3 timers based on Real Time
Clock.
Parameters for PID Controller 1. Motor control or
external usage.
Parameters for PID Controller 2. External usage.
Parameters for multi-pump usage.
Parameters for Fire Mode.
24-hour support +1-800-877-7545 (Dial 2)
Siemens Application