Huawei ACBox Series User Manual page 38

ACBox 12-In 1-Out AC Combiner Box
User Manual
Figure 5-8 Stripping an AC output power cable
(1) Core wire
Step 2 Crimp an OT terminal.
Step 3 Route the cable through the cable hole for the AC output power cable.
Step 4 Connect the AC output power cable to the U, O, and W terminals on circuit breaker QF13,
and tighten the bolts using a torque wrench.
Figure 5-9 Connecting AC output power cables
When using a torque wrench to tighten a bolt, use an M12 wrench to tighten the nut at the
same time.
----End
Issue 03 (2018-05-15)
(2) Insulation layer
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) Jacket
32