ABB SmartMedia SM2000 Hardware Installation page 8

...4 Downloading and Installing the
Operating System Software – Figs. 4.1 to 4.5
4) Refit the instrument to the case – see Fig. 4.1.
5) Restore the power supply to the instrument.
6) Follow the on-screen
touchscreen calibration.
Caution. Do not use sharp objects such as
screwdrivers, pen nibs etc. to operate the touch screen.
7) Save configuration files to removeable media, as required,
and delete the binary partition – see Fig. 4.2.
Insert a memory card containing
2
a folder named 'SM2000'
Highlight a configuration
4
to save to removable media.
5 Press the 'Operation' key.
8
instructions and
1
Press the
'File Viewer' button.
Press the
3
'Internal File View' button.
Press the 'Copy to Storage Card'
6
option on the pop-up menu.
7
Repeat steps
4
save other configurations
as required.
Fig. 4.2 Saving Configuration Files and Deleting the Binary Partition
perform
Note. If no configuration
files are required to be saved
to removeable media, proceed
to step .
9
'Delete Binary Partition' button.
Wait for dialog to
appear indicating
to to
6 that this operation
was successful.
Isolate the instrument from the power supply.
11
Press the 'Exit' key twice to return
to the Application Launcher screen.
Press the
9
10
8