Siemens SINAMICS S120 Manual page 51

NOTICE
Requirements for IP20
Cabinet Modules do not fulfill the requirements for IP20 until they have been closed off by
installing a side panel on the right (option M26) and a side panel on the left (option M27)!
The cabinet units are installed in accordance with the dimension drawings supplied. The
clearance to be maintained between the top of the cabinet and the ceiling is shown in the
diagram below. Additional dimensions must be taken into account for the M06 (cabinet base)
and M07 (cable-marshaling compartment) options.
Figure 3-1
Note
Further dimensions
Further dimensions can be found in the relevant dimension drawings on the customer DVD
supplied with the device.
Cabinet Modules
Manual, 03/2013, A5E03263538A
Required room height for different degrees of protection (without Options M06 and M07)
Mechanical installation
3.3 Installation
49