Table of Contents
Advertisement
7
Device website
You can access ISE SMART CONNECT KNX Panasonic via the "Device website" application".
The device website offers a range of functions, including:
►
•
Check device status
•
Configure network settings
►
•
Update firmware
see Updating the firmware via the device website, p. 35.
•
Reset to factory settings
p. 35.
►
•
Generate log files
see Generating log files, p. 59.
The device website is run on your installed browser. You do not require any additional software.
As soon as the device is available you can access the device website via the IP.
The device website is not password-protected. However, the device is already pre-
pared for potential future password protection. The initial password can be found
on a product sticker on the side of the device.
7.1
Calling up the start screen
Call up the device website by actioning one of the following:
•
Enter the device's IP address in the address bar of your browser.
•
Alternatively, select the device in the network environment category <<Other devices>> (see figure 13,
item 1): Double click on the device icon (see figure 13, item 2).
Figure 13: Calling up the device network via the network environment
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
see Troubleshooting, p. 55.
►
see Network settings via the device website, p. 33.
►
see Resetting the device to the factory settings via the device website,
Device website
1-000C-000
S. 21 / 69
Advertisement
Table of Contents
