Huawei SUN2000 Series User Manual page 39

SUN2000-(3KTL-10KTL)-M0
User Manual

Pay attention not to damage the core wire when stripping a cable.

The cavity formed after crimping the conductor strip of the OT terminal needs to wrap the
core wire completely. The core wire needs to contact the OT terminal closely.

Wrap the wire crimping area with the heat shrink tubing or the PVC insulation tape. The
following figure uses the heat shrink tubing as an example.

When using the heat gun, protect devices from being scorched.
Figure 5-2 Crimping an OT terminal
(1) Cable
(4) OT terminal
Step 2 Connect the PE cable.
Issue 04 (2019-10-18)
(2) Core wire
(5) Crimping tool
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) Heat shrink tubing
(6) Heat gun
33