Table of Contents
Advertisement
4. To replace, screw the valve insert with the stainless steel disc onto the valve insertion tool.
The chamfered surface of the stainless steel disc must point to the valve insert (as in, the larger
surface facing up, the smaller surface down).
5. To make it easier, the valve insert can be slightly lubricated with standard household lubricating oil.
6. Insert the valve down into the guide housing until it stops. Apply gentle taps to reseat.
7. Using pliers RT17844, replace the retaining ring into the groove above the stainless steel disc.
16
Chamfer
valve insert
Advertisement
Table of Contents
