Table of Contents
Advertisement
REPLACING FILTERS
Remove Used Filters
Turn the unit power off before removing filters.
1
Latch
Remove the front panel
by grasping its upper
edge and gently pulling
forward.
Prepare New Filters
Remove filters from protective plastic wrap.
Operating the unit without removing
filters from plastic wrap may cause
abnormal noise, deformation, or fire as a
result of overheating.
NOTICE
For optimal performance, only Genuine
Winix Replacement filters should be used
with this unit.
Insert New Filters
Install the filters until they fit securely in place.
1
Insert the True HEPA
Filter first, then the Odor
Absorbing Carbon Filter.
Resetting the Unit
After replacing the filters, turn the power
onto the unit and then use a thin object,
such as a paper clip, to press the RESET
switch for 5 seconds.
English
2
▶
Press on the Pre-Filter
tabs near the top of the
filter, release and remove.
2
True
HEPA
Filter
▶
Carbon
Filter
Insert the Pre-Filter.
3
Tabs
▶
Pre-Filter
Pull out the Carbon Filter
and True HEPA Filter.
3
Tabs
Latch
▶
Pre-Filter
Put the front panel back on.
9
C535
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the C535 and is the answer not in the manual?
Questions and answers
the unit turns on, the four **** lights come on then they go off and the first two light are blinking white. no ****.