Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Winix 5300
Summary of Contents for Winix 5300
- Page 1 True HEPA Air Cleaner with PlasmaWave Technology Use and Care Guide...
- Page 2 When installed, operated and maintained according to all instructions supplied with this product, Winix, at its option, will repair or replace the product if it fails because of a defect in material or workmanship, as determined by Winix. If the unit is believed to be defective within the one year warranty period, please call 1-877-MY-WINIX (699-4649) to arrange for repair.
- Page 3 Motor Type BLDC Motor Air Quality Sensor Unit Dimension or incense. Unit Weight...
- Page 4 Sleep Mode When set on Sleep Mode, display panel Replacement Filter Indicator Light lights will dim and the unit will not go Indicates when to replace True HEPA Filter above low fan speed to help keep the depending on usage. room dark and quiet.
- Page 5 NOTE: Follow these instructions for best results. Replace the front panel by hooking the front panel on the top of the unit. Gently push the bottom of panel until it snaps into place. sealed plastic wrap NOTE: For the first 4 minutes after turning the unit on, air quality indicator will flash while the unit measures air quality.
- Page 6 AIR QUALITY INDICATOR indicator will illuminate when to replace the True HEPA Filter. - Auto: The unit is set to default to AUTO mode when it is first turned on. The sensor will automatically adjust fan speed as needed. - Sleep: When in SLEEP mode, the control panel will dim and the unit will operate quietly at the lowest fan speed.
- Page 7 or the SPEED/MODE button on the unit. air quality. If the unit is set on automatic operation, it will adjust fan speeds to compensate for changes in air quality. SLEEP MODE When set on Sleep Mode, display panel lights will dim and the unit will not go above low fan speed to help keep the room dark and quiet.
- Page 8 Clean outside of unit as necessary by wiping with a dry, soft cloth; for stub- born stains, use a warm, damp cloth. The REPLACEMENT FILTER INDICATOR will illuminate when to replace the True HEPA Filter. Please note that the carbon filter needs to be changed every 3 months or as needed.
- Page 9 Compressed air may also be used to blow dust that may be clogging the sensor. With the power on, press the FILTER REPLACEMENT RESET button and hold for 5~10 seconds or until the light turns off. See page 10 instruction 5 for details.
- Page 11 11-12...
Need help?
Do you have a question about the 5300 and is the answer not in the manual?
Questions and answers