Table of Contents
Advertisement
Station Settings
Station Settings allows you to set parameters specific to each station.
• Use the Up or Down Arrows
• Use the Left and Right Arrow Keys
• Use the Input Dial
Command
Function
DB1 or 2
Select the daughterboard.
Select the station you want to edit in this field. Choose from Station 01 through the gateway maximum
S01
station count of 500 (per daughterboard).
Total scheduled station runtime for the current irrigation day.
Sched Today:
Water Today:
Total station runtime that has occurred for the current irrigation day.
Runtime resulting from a station that is manually activated via the output hardware switch will not
be captured.
Total station runtime that occurred for the previous irrigation day.
Water Yestr:
Runtime resulting from a station that is manually activated via the output hardware switch will not
be captured.
Disable:
Disable station operation by selecting Yes.
Resume station operation by s electing No.
Hold:
Use this menu item to delay operation for this station. Select the hold duration from 01–30 days,
Permanent or None. This option is useful when a specific station needs to be deactivated without
affecting any of the programs. This does not affect manual starts from the front panel.
Must be set to 15V only.
Capacitor
Voltage
Shows the 5-character address of the decoder module, is downloaded from Lynx.
Dec Addrss:
Dec Offset:
Shows the ouput number (1,2,3, or 4), is downloaded from Lynx.
22
to navigate through the menus.
to advance to the next entry field on the same menu line.
to select values when editing.
S016 100%
1STSTLAWN
Decoder Addr:
38684
Dec Sta: 4 Board: 1
Disable:
No
Hide quick links:
Advertisement
Table of Contents
