Select Station; Select Station Mode; Select Program; Select Water Window Option - Toro 24 User Manual

Select Station

1. Withthe Function dial in the Station Data position, turn the
Upper Line knob to display Select Station.
SELECT STATION
01
2. Station 01 is selected by default. To change the station number,
turn the Lower Line knob.
Note: The Maximum Active Station number defined in Setup,
determines station number access.

Select Station Mode

1. Turn the Upper Line knob to display Station Mode.
STATION MODE
User - With ET
2. Turn the Lower Line knob to select Use - With ET or User - No ET.

Select Program

1. Turn the Upper Line knob to display Select Program.
SELECT PROGRAM
A (Optm S12:00am W16:00)
2. Program A is selected by default. To change the program selection,
turn the Lower Line knob.

Select Water Window Option

1. Turn the Upper Line knob to display Use Water Window.
Use Water Window
Yes (end time 04:00pm)
2. Yes is selected by default. To enable the station to ignore a water
window constraint, turn the Lower Line knob to select No.
STA 01
STA 01
STA 01
33