ABB Relion 670 Series Installation Manual page 38

Section 6
Connecting
Table 3:
Module
Binary input module (BIM)
Binary output module (BOM)
Binary I/O module (IOM)
Line data communication modules (LDCM),
short range, medium rang, long range
Serial SPA/LON/IEC 60870-5-103
communication modules (SLM)
Optical Ethernet module (OEM)
Optical Ethernet SFP
Galvanic RJ45 Ethernet SFP
mA input module (MIM)
GPS time synchronization module (GTM)
Static output module (SOM)
IRIG-B Time synchronization module (IRIG-B)
32
Application specific modules
Description
Module with 16 optically isolated binary inputs
Module with 24 single outputs or 12 double-pole command
outputs including supervision function
Module with 8 optically isolated binary inputs, 10 outputs and 2
fast signalling outputs.
Modules used for digital communication to remote terminal.
Used for SPA/LON/DNP3/IEC 60870–5–103 communication.
Module used for Ethernet traffic. It has support for two SFPs.
Small form factor pluggable for Ethernet communication
Small form factor pluggable for Ethernet communication
Analog input module with 6 independent, galvanically separated
channels
Used to provide the IED with GPS time synchronization and pulse
per second (PPS) output
Module with 6 fast static outputs and 6 change over output relays
Module with 2 inputs. One is used for handling both pulse-width
modulated signals and amplitude modulated signals and one is
used for optical input type ST for PPS time synchronization.
1MRK 514 026-UUS F
670 series
Installation manual