Mounting Procedure For Flush Mounting; 19" Panel Rack Mounting; Overview - ABB Relion 670 Series Installation Manual

1MRK 514 026-UUS F
5.3.1.2

Mounting procedure for flush mounting

4
IEC16000080 V1 EN-US
Figure 3:
PosNo
1
2
3
4
5
6
5.3.2

19" panel rack mounting

5.3.2.1

Overview

All IED sizes can be mounted in a standard 19" cubicle rack by using a suitably sized mounting kit
consisting of two mounting angles, their fastening screws and washers.
The mounting angles are reversible which enables mounting of IED size 1/2 x 19" or 3/4 x 19" either
to the left or the right side of the cubicle.
670 series
Installation manual
6
3
2
Flush mounting details.
Description
Sealing strip, used to obtain IP54
class. The sealing strip is factory
mounted between the case and
front plate.
Fastener
Groove
Screw
Joining point of sealing strip
Panel
A separately ordered rack mounting kit for side-by-side mounted IEDs or IEDs
together with RHGS cases should be selected so that the total size equals 19".
1
5
IEC16000080=1=en.vsd
Quantity
-
2
-
4
-
-
Section 5
Mounting
M11942-2 v5
Type
-
-
-
M3x8 mm
-
-
IP10313-1 v1
SEMOD127656-5 v4
21