Starting The Trimmer; Advancing The Line; Advancing The Line Manually; Stopping The Trimmer - Toro 51480A Operator's Manual

Starting the Trimmer

To start the trimmer, slide the lock switch back to the O
then squeeze the trigger (Figure
1. Lock switch

Stopping the Trimmer

To stop the trimmer, release the trigger.
N
7).
Figure 7
2. Trigger

Advancing the Line

Note:
position,
The trimmer is equipped with an auto-feed head.
1. With the trimmer running, release the switch trigger.
2. Wait 2 seconds, then press the switch trigger.
Note:
with each stop and start of the switch trimmer until the line
reaches the length of the grass deflector blade.
3. Resume trimming.
Advancing the Line
Manually
Disconnect the string trimmer from the power supply, then push
the red button at the base of the spool retainer while pulling on the
trimmer line to manually advance the line.
g015658
Trimming
7
The line extends approximately 6 mm (1/4 inch)
Figure 8
g021135