Table of Contents
Advertisement
D.
Assemble the switch panel to the
side-frame channels with the carriage
bolts and locknuts
removed in step 3B.
E.
Torque the flange locknuts to 1017 to
1243 N∙cm (90 to 110 in-lb).
8
Installing the Sunshade
No Parts Required
Procedure
1.
Align the holes in the grommets of the sunshade
with the 4 clipnuts of the side-frame channels.
2.
Assemble the sunshade to the frame channels
(Figure
14) with the 4 flange-head bolts (5/16 x
1-1/4 inches) and 4 washers (5/16 inch) that you
removed in
2 Removing the Sunshade (page
Figure 13
(Figure
12) that you
g244666
1. Sunshade
2. Flange-head bolt (5/16 x
1-1/4 inches)
3.
Torque the flange-head bolts to 1017 to 1355
N∙cm (90 to 120 in-lb).
Operation
Using the Cooling Fan
1. Knob (fan switch)
2).
•
To run the cooling fan, rotate the knob for the
fan switch clockwise to the
fan-speed position
•
To shut off the cooling fan, fully rotate the knob
counterclockwise to the
7
Figure 14
3. Washer (5/16 inch)
4. Clip nut (side-frame
channel)
Figure 15
,
, or
LOW
MEDIUM
(Figure
15).
position
(Figure
OFF
g244327
g244665
HIGH
15).
Advertisement
Table of Contents
