7
Installation
1. Install the adaptor A and adaptor B (flat mouth or round mouth) onto the exhaust duct as shown in
Fig. A or Fig. B.
(Be used to install to the window)
Fig. A
2. Connect the exhaust duct to the Air outlet connector on back of the unit. Slide-in the adaptor A
downwards until it is locked in place. (Fig. C)
Air outlet connector
7.4 Install the window slider kit
1. Cut the foam seal (adhesive type) to the proper length and attach it to the window sash.
Mobile room air conditioner / Installation Manual
(flat mouth)
adaptor A
Fig. C
Horizontal
Foam Seal A
window sash
Screw A
window
slider kit
or
(Be used to install to the wall (only for some units))
or
Vertical
(round mouth)
Fig. B
31 / 88 EN