NEC Express5800 Series Maintenance Manual page 99

Chapter 2 Configuring and Upgrading the System
3. Execute "5 Delete Mirroring Arrays (RAID1)" of the ftdiskadm command, and clear duplication of the hard
disk drive whitch the slot number has been specified.
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions (RAID1)
7 Make Striping Array
8 Delete Striping Array
c Configurations
q Quit
Command: 5
[Delete Mirroring Arrays (RAID1)]
* Which scsi SLOT? [1-16] 2 ------------------------------------- (*1)
mdadm: stopped /dev/md0
mdadm: stopped /dev/md1
mdadm: stopped /dev/md2
*1 Enter the slot number (2). The slot number (10) of the pair disk can be enterd as well.
4. Execute "1 List RAID Arrays" of the ftdiskadm command, and check that the duplicated hard disk has been
correctly cleared.
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions (RAID1)
7 Make Striping Array
8 Delete Striping Array
c Configurations
q Quit
Command: 1
[List RAID Arrays]
Name Partition
===============================================================================
< Mirroring Array (RAID1)
md123 /var/crash
md124 /boot/efi
md125 swap
md126 /boot
md127 /
(RAID1)
(RAID1+0)
(RAID1+0)
(RAID1)
(RAID1+0)
(RAID1+0)
Status Member
>
DUPLEX (1)104001-part2
DUPLEX (1)104001-part5
DUPLEX (1)104001-part3
DUPLEX (1)104001-part4
DUPLEX (1)104001-part1
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
1. Hard Disk Drive Duplexing
(9)114001-part2
(9)114001-part5
(9)114001-part3
(9)114001-part4
(9)114001-part1
99