Chapter 2 Configuring and Upgrading the System
5.3.1
Installing 2.5-inch Hard Disk Drive
Follow the procedure below to install the hard disk drives. Install the hard disk drives from a smaller slot number
to larger number on CPU/IO module 0/1, from slot 0 to slot through slot 7.
Below is procedure with the system started.
1. Remove the front bezel.
2. Identify the slot to which you want to install a hard disk drive.
3. If a dummy tray is inserted in a slot you want to install the hard disk drive, remove the dummy tray.
4. Unlock the hard disk drive.
116
See Chapter 2 ("5.1.3 Installing, Removing and Replacing Devices") and Chapter
Important
1 (1.8 Anti-Static Measures )in Safety Precautions and Regulatory Notices before
starting installing or removing options.
If you install the hard disk drives with the system turned off, mount a pair of two
hard disk drives that form dual disk configuration before starting the system.
After the system started up, see Chapter 2 (1. Hard Disk Drive Duplexing) to set
the dual disk configuration
Important
Keep and store the dummy tray for future use.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices