Maintenance Of The Server - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
4.

Maintenance of the Server

This server can be maintained in two ways.

To use NEC ESMPRO Manager for remote maintenance

To use ft Server Utility on this server for local maintenance.
The table below lists the availability of maintenance features provided by components.
Maintenance
features
Start
Stop
View MTBF information
MTBF clear
Diagnosis
Dump collection
Board switch
BIOS Update
F/W update
Quick dump
Auto firmware update
Auto module start
Remote: Executable from remote management PC by using NEC ESMPRO Manager
Local: Executable on local server by using ft Server Utility
–: Not supported
To start ft Server Utility, select menus as follows:
Tips
# /opt/nec/esmpro_sa/bin/ESMftcutil
Component
General
–
–
–
–
–
–
–
–
–
–
–
–
The server does not support maintenance feature for the components listed below.
Tips

Internal devices
SCSI adapter under PCI module
Ethernet board under PCI module
Network port of Ethernet board under PCI module
SCSI enclosure and SCSI slots under the enclosure

Optional devices

Consult with your maintenance personnel to use the maintenance features.
Important

Perform the following steps before replacing component.
1. Clear MTBF information of relevant component.
2. Stop the relevant CPU module and PCI module.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
CPU module PCI module
Remote / Local Remote / Local
Remote / Local Remote / Local
Remote / Local Remote / Local
Remote / Local Remote / Local
– –
– –
Remote / Local –
Remote / Local –
– –
– –
– –
– –
4. Maintenance of the Server
SCSI Firmware
enclosure under BMC
– –
– –
– –
– –
– –
– –
– –
– –
– Local
– –
– –
– –
23