Installing Cpu - NEC Express5800 Series Maintenance Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Configuring and Upgrading the System
5.6.1
Installing CPU
Follow the steps below to install a CPU and heat sink.
1. Shut down the OS.
The server is automatically powered off.
2. Disconnect the power cords from the outlets.
3. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
4. Remove the air duct according to Chapter 2 (5.5.2 Removing DIMM).
5. Verify the location of the CPU socket.
6. Remove the protective cover from processor (CPU) socket.
7. Push down the lever marked with "
8. Push down the lever marked with "
134
Important
Keep and store the removed protective cover with care.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
" to unlatch from the hook, and open the lever until it stops.
" to unlatch from the hook, and open the lever until it stops.
Advertisement
Table of Contents
