How To Use; (Iv) Salad Drainer - Panasonic MK-F300 Operating Instructions Manual

FOOD PROCESSOR
Ingredient Preparations for Salad Drainer
Function Ingredient
Lettuce
Leaves
Drainer
Cabbage
How to Use: Salad Drainer
1
2
3
1
After inserting the Salad Drainer into the Bowl, insert the
ingredients into the Salad Drainer. Place the Drainer
Cover on top of the Salad Drainer until the mark aligns
as shown in A. Turn the Drainer Cover anticlockwise
until the mark aligns as shown in B.
3
2
Plug-in the plug into the socket and turn the Rotary
Switch to select the speed required.
Note:
• Maximum working capacity of the Salad Drainer: 200 g or till maximum height of Salad Drainer, whichever
comes first.
• Prohibited ingredients: refer to page 5.
• Ensure that the ingredients are spread evenly around the Salad Drainer before processing.
• Always ensure that the Drainer Cover is attached onto the Salad Drainer before operation, otherwise the
ingredients might come out and tear around the Bowl.
-SALAD DRAINER-
Max Single
Speed Operating Time (approx.)
Use
100 g
1
200 g
A
B
PP
1
20 ~ 40 sec
20 ~ 50 sec
2
1
Place the Bowl Lid on top of the Bowl and turn it
clockwise until a 'click' sound is heard. Attach the Bowl
assembly onto the Motor Housing as seen in page 8.
Note:
Ensure that the Drive Shaft is protruding from the
Salad Drainer after insertion.
4
1
After the processing is completed, return the Rotary
Switch to OFF position "0" and unplug from the socket.
Remove the Salad Drainer from the Bowl.
Preparation Method
Cut into 3 ~ 5 cm slices.
Shredded to 1 ~ 3 mm.
2
2
3