Toro 03621 Original Instructions Manual page 22

The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
03621 315000001 and Up
03623 315000001 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
David Klis
Sr. Engineering Manager
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
April 25, 2016
Declaration of Incorporation
Product Description
22-inch 8-Blade DPA
Cutting Unit with 5in Reel,
Reelmaster 3555 or 5010
Series Traction Unit
22-inch 11-Blade DPA
Cutting Unit with 5in Reel,
Reelmaster 3555 or 5010
Series Traction Unit
Invoice Description
22IN 5IN 8-BLD (RR) DPA
CU (5010-H)
22IN 5-IN 11-BLD (FSR)
DPA CU (5010-H)
22
General Description
Cutting unit
Cutting unit
EU Technical Contact:
Marc Vermeiren
Toro Europe NV
B-2260 Oevel-Westerloo
Belgium
Tel. 0032 14 562960
Fax 0032 14 581911
Directive
2006/42/EC
2006/42/EC