Engine Drive Belt Routing; Normal Maintenance Replacement Parts - Suzuki XL7 Owner's Manual
Suzuki automobile owner's manual
Hide thumbs
Also See for XL7:
- Specifications (4 pages) ,
- Owner's manual (656 pages) ,
- Service manual (597 pages)
Table of Contents
Advertisement
MAINTENANCE SCHEDULE
Normal Maintenance Replacement Parts
Replacement parts identified below by name, part number, or specification can be obtained from your dealer.
Engine Air Cleaner/Filter
Engine Oil Filter
Passenger Compartment Air Filter Element
Replacement Battery
Spark Plugs
Windshield Wiper Blades
Engine Drive Belt Routing
3.6L V6 Engine
6-17
Part
Driver's Side – 24 inches (60.0 cm)
Passenger's Side – 19 inches (47.5 cm)
Rear – 13.0 inches (33.0 cm)
1686383
SUZUKI Part No.
13780–78J00
16510–78J00
95861–78J00
33610–78J00
1119A–78J00
38340–78J00
38340–78J10
38820–78J00
- Quick Links:
- All-Wheel Drive System
- Engine Oil
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the XL7 and is the answer not in the manual?
Questions and answers
How to replace theottle bottle position sensor
To replace the throttle position sensor on a Suzuki XL7:
1. Locate the throttle position sensor.
2. Push the tab on the harness and pull it free.
3. Remove the two Phillips screws securing the sensor using a Phillips bit and a ratchet.
4. Pull the old sensor off.
5. Place the new throttle position sensor in position.
6. Secure it with the two Phillips screws and tighten them.
7. Reconnect the harness.
The replacement is complete.
This answer is automatically generated
Can this plastic shroud be taken off without causing any problems?
The context indicates that the plastic shroud can break when touched or removed improperly. Special tools, such as an angled tool, are needed due to limited space. Care must be taken to avoid damage, so while it can be removed, improper handling may cause issues.
This answer is automatically generated
Какую жидкость заливают в тормозную систему