Machine sends a request to the InfoCenter
•
The engine sends a red, stop lamp message
Note:
If the alarm stops or if the operator
acknowledges the alarm by pressing any button
on the InfoCenter, then the alarm should stop.
•
Regeneration requested by the engine
•
Any engine fault
•
Any advisory; refer to
10)
•
The engine sends an amber warning message
•
The fuel level is below 2.2%
Main Menu
Press and hold the fifth button (far right) on the
InfoCenter to access the main menu.
From the main menu screen, you can access the
Service screen, Diagnostics screen, Settings screen,
or the About screen
(Figure
Service Screen
If you have an issue that requires use of the Service
screen (i.e., calibrating the traction pedal), contact
your Toro distributor for assistance.
InfoCenter Advisories (page
6).
Figure 6
Accessing the Protected
Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the
code, contact your Authorized Toro Distributor for
assistance.
•
5900
•
1234
1. From the H
buttons 1, 2, 3, or 4 to access the pop-up menu
bar at the bottom of the screen
2. Press and hold button 5 to access the M
M
ENU
G033167
g033167
5
S
, press buttons either
OME
CREEN
Figure 7
(Figure
8).
(Figure
7).
g214880
AIN