Pairing With A Bluetooth Enabled Device; To Pair Your Device - Wellis MONT BLANC User Manual

OPTIONAL ACCESSORIES - AQUASOUL PRO
CONNECTIONS

PAIRING WITH A BLUETOOTH ENABLED DEVICE

Aquasoul Pro can play music from any device equipped with
Bluetooth wireless technologies, however, you must pair
your mobile device to the audio receiver in order to do so.
The system is ready to pair when it is not already connected
to another device. To pair your device, make sure that you
are close enough to the Aquasoul Pro, that it is turned on and
that it is set in Bluetooth mode.
FOLLOW THESE STEPS TO PAIR YOUR DEVICE
1. Open the Bluetooth settings on your device. The location
of the settings will depend on the device you are using.
2. Make sure Bluetooth is on.
3. Select "in.stream 2" in the list of discoverable Bluetooth
devices detected nearby.
4. When prompted, enter 5555 as the PIN Code.
46
NOTE: In basic configuration (not connected to a keypad or
controller), Aquasoul Pro is set in Bluetooth mode. Otherwise,
please refer to your specific keypad operating manual for details
on the Aquasoul Pro functions.
5. Once the pairing is done, select in.stream 2. When "con-
nected" is displayed, Aquasoul Pro will be ready to start
playing the selected audio.
Note: If the device moves out of range and loses connection, it
should reconnect automatically as soon as it is close enough.
This should happen without having to go through the menu
again.
Aquasoul Pro will keep up to 8 devices in its memory. If one of
the last three connected devices is in range and has its Bluetooth
turned on, it will automatically connect to Aquasoul Pro.
If multiple devices are within range and have already been
paired with Aquasoul Pro, priority will be given to the device that
was first detected in the Aquasoul Pro memory.