Figure 9-99 Usb Key Error - Reporter Pro - NEC Univerge SV9100 System Hardware Manual

9-118
8. On initial installation, the NEC IP/Digital Reporter Pro automatically
launches. If Reporter Pro cannot find a license dongle the following
window displays.
Figure 9-99 USB Key Error – Reporter Pro
9. Click on the Close button.
12.6.2 Install Reporter Pro Licensing
Two methods of licensing (USB Dongle or LMS) can be used with the
SV9100 system. Follow the instructions based on the license type
purchased. Refer to
installation.
12.6.2.1 License Manager System
This method requires the license to be loaded on the SV9100
and the application configured to retrieve license information
from the PBX.
1.
2.
3.
12.6.2.2 USB Dongle
This method requires the use of a NEC IP/Digital application
security key (USB dongle shipped with the application) and
inserted when Reporter Pro is running.
1.
2.
12.6.2.2 USB Dongle on page 9-118
From Settings select License Server.
Enter the IP address of your PBX, then click OK.
Shut down and relaunch the application.
Insert the USB dongle into an available USB port on the PC.
Found New Hardware is displayed then Hardware
successfully installed.
If Windows does not locate the driver, browse
to the CD or download from NEC site. Drivers
TIP
are located on the CD in the Driver folder.
Installing SV9100 Optional Equipment
Issue 3.0
for USB Dongle