Figure 3-89 Assemble Stand Mount With Screws - NEC Univerge SV9100 System Hardware Manual

S 6 S
ECTION TAND
6.1
3-72
3. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-19
grounding the system.
4. Refer to
continue installation of the chassis or, Chapter 6 paragraph
Installation and Safety Precautions on page 4-4
blades.
M C
OUNTING THE
Stand Mounting the 19" (CHS2UG-US) Chassis
A single or multiple chassis can be stand mounted. Controlling and Expansion
chassis can be stand mounted using the CHS2UG STAND KIT (K) and CHS2UG
STAND KIT (EXT).
6.1.1 CHS2UG-US Chassis Installation
1. Using the supplied screws, assemble the CHS2UG STAND KIT (K)
and CHS2UG STAND KIT (EXT) (refer to
Stand Mount with

Figure 3-89 Assemble Stand Mount with Screws

2. Secure the CHS2UG-US chassis to the assembled CHS2UG STAND
KIT (K), see
STAND KIT (K) with Screws on page
3.3.5 Install AC Power Cords on 19" Chassis on page 3-20
HASSIS
Screws).
Figure 3-90 Secure CHS2UG-US Chassis to CHS2UG
Issue 3.0
3.3.3 Install
for complete details on
2.1
for installation of
Figure 3-89 Assemble
Expansion
Plate
3-73.
Installing the SV9100 Chassis
to