NEC Univerge SV9100 System Hardware Manual page 580

Hide thumbs Also See for Univerge SV9100:

Table of Contents

10.1 DESI Printer Sheets

Night Mode Selector Switch

The Night Mode Switch relay closes when the system detects either an open or

closure on the MISC block NIGHT SW terminals. Maximum 48v DC is output to

the switch when open, and 7mA DC when shorted.

Connecting a Night Mode Selector Switch

Connect an RJ-61 modular line cord from the CN10 connector on the

GCD-CP10 to the appropriate location on the extension cross-connect

Connect the two-conductor station cable from the cross-connect block to the

night switch mechanism output leads.

Install bridging clips as required.

Telephones can be easily labeled by removing the plastic faceplate. These labels

can be printed by hand, typewriter, or printing DESI labels. Labels for this are on 8

1/2 x 11" paper, which allows for easy printing by any printer – dot matrix, laser,

DESI Printer Sheets are available for the following:

Economy 2E – DESI ITL/DTL-2E (25 PKG)

Economy 6DE – DESI ITL/DTL-6DE (25 PKG)

All Value Telephones – DESI ITL/DTL-12D/24D (25 PKG)

8LK – DESI ITL/DTL 8LK (25 PKG)

60 DSS – DESI DCL-60 (25 PKG)

Clear Side Panel – DESI ITL/DTL-SIDE (25 PKG)

LCD Value, Clear Side – DESI ITL/DTL-SIDE-LCDV (25 PKG)

Installing SV9100 Optional Equipment

Chapters

Table of Contents