Figure 9-23 Voice Security Recorder Installation-3 - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual

Figure 9-23 Voice Security Recorder Installation-3

4. The software is fully tested, but has not yet been submitted to Microsoft for
approval. Press Continue Anyway.
5. Press Finish to close the dialog box.
6. Run SBladep.exe on your NEC Installation CD to install the D
Security Recorder application software on your PC.
7. Using the USB cable provided, connect the USB interface of the NEC VSR
unit to an available USB port on your PC.
8. Unplug the line cord from your telephone and connect the phone to either
term
port on the D VSR unit.
9. Connect the NEC telephone system to the remaining port on the D
unit (refer to Figure 9-34 Voice Security Recorder Connection on page
9-42).
11.3.1 VSR Application Software
The VSR software is delivered on a Compact Disk using a self-starting
install shield. The CD contains all applicable files and installation
procedures to operate to this specification, including USB device drivers,
software application, and Help files.
A quick-start instruction sheet and a recorded user guide that steps the user
through the various options are provided.
term ®
Voice
term
VSR
9-31