Toro Greensmaster 04358 Operator's Manual page 17

Raise/Lower Mow Control
Moving the control (Figure
operation lowers the cutting units and starts the reels.
Pull back the control to stop the reels and raise the
cutting units. During operation, pull back the control
momentarily and release it if you need to stop the
reels; start the reels again by moving the control
forward.
Figure 17
1. Functional-control lever
2. Ignition switch
Functional-Control Lever
The functional-control lever
traction selections plus a N
shift from mow to transport or transport to mow (not
to neutral) while the machine is in motion; no damage
will result.
•
R position—neutral and backlapping
EAR
•
M position—used for mowing operation
IDDLE
•
F position—used for transport operation
RONT
Ignition Switch
Insert the key into the switch
clockwise as far as possible to the S
to start the engine. Release the key as soon as the
engine starts; the key moves to the O
the key counterclockwise to the O
off the engine.
Steering-Wheel Locking Lever
Rotate the lever (Figure
adjustment, raise or lower steering wheel for your
comfort, then, rotate the lever rearward to tighten the
adjustment.
17) forward during
3. Raise/lower mow control
(Figure 17) provides 2
position. You can
EUTRAL
(Figure 17) and turn it
position
TART
position. Turn
N
position to shut
FF
18) forward to loosen the
1. Steering-wheel locking lever
Steering-Arm Locking Knob
Loosen the knob
knob clears the notches in the steering arm. Raise
or lower the steering arm to the desired height while
aligning the shoulder of the knob with the notch in the
g005504
steering arm. Tighten the knob to lock the adjustment.
1. Steering-arm locking knob
Fuel-Shutoff Valve
Close the fuel-shutoff valve
tank, when storing or transporting the machine on a
truck or trailer.
1. Fuel-shutoff (under the fuel tank)
17
Figure 18
(Figure 19) until the shoulder on the
Figure 19
(Figure 20), under the fuel
Figure 20
g005505
g032583
g005109