Table of Contents
Advertisement
Procedure:
INSTALLING THE BARD DISK POWER BOOST MODULE
(cont. )
Installing the Bard Disk Power Boost Module
7.
Position the male
terminal over the
screw hole, and
insert a :/1:10-32
slot head screw and
the original lock-
washer through the
male terminal and
the terminal lugs
on the ends of the
red wires.
Do not
overtighten the
screw.
\ .
/m,le '.,min,j
~/
8.
Repeat step 7 to attach a male terminal to the capacitor
terminal containing black wires (same capacitor).
9.
Repeat the step 7 to install a third male terminal to the
orange wire terminal of the middle filter capacitor.
10. Push the thin red
wire connector from
the power boost
module cable on the
male terminal
attached to the
group of red wires
on the large filter
capacitor.
----------------------------------
HORIZON Hard Disk Installation Guide
---->
15
Advertisement
Table of Contents
