Table of Contents
Advertisement
PREPARING THE DISK DRIVE CAVITY
Procedure:
Removing the HORIZON Cover
------
--------------------
1.
Open the disk drive doors and remove all disks.
2.
Turn the main power switch OFF.
3.
Unplug the power cord from the wall outlet, and disconnect
the power cord from the power receptacle on the back of
the computer.
4.
Make a note of the locations (for later re-connection) of
all cables attached to the back panel of the computer.
Disconnect the cables.
5.
Remove the four
screws that hold
the HORIZON top
cover in place and
put the screws and
lock washers in a
safe place.
.
......
6
HORIZON Hard Disk Installation Guide
Advertisement
Table of Contents
