Mitsubishi Electric MELSEC iQ-R RD78G4 User Manual page 42

Wiring products
The following describes the devices used for CC-Link IE TSN.
■Ethernet cable
Use the Ethernet cable that meets the following standards.
Communication Ethernet cable
speed
1Gbps Category 5e or higher, straight cable (double shielded, STP)
Cables for CC-Link IE TSN are available from Mitsubishi Electric System & Service Co., Ltd. (Catalogs for cable are also
available.)
In addition, the connector processing of cable length is available for your preference. Please consult your local Mitsubishi
representative.
Communication Type
speed
1 Gbps Category 5 or higher, straight cable (double shielded, STP)
The communication error can occur with the high-frequency noise from the device except CPU unit depending
on the connecting environment. The following indicates the countermeasure of the Motion module side to
prevent the effect of the high-frequency noise.
Wiring connection
• In wiring process, keep a distance with the main circuit lines or power cables.
• Ground the cables with clamping.
■Hub
Use the following switching hub.
Type
Industrial switching hub
*1 NZ2EHG-T8 is out of production.
Precautions
Since there are different restrictions for system configuration using TSN hub and system configuration using general-purpose
hub, setting with an engineering tool is required.(5 SYSTEM CONFIGURATION)
6 INSTALLATION AND WIRING
40
6.2 Wiring
Term Part name
TSN hub CC-Link IE TSN compatible switching hub (CC-Link Partner Association www.cc-link.org)
General-purpose hub • NZ2EHG-T8(N) (Mitsubishi Electric Corporation)
• DT135TX (Mitsubishi System Service Corporation)
Connector Standard
RJ45 connector The following conditioning cables:
• IEEE802.3 (1000BASE-T)
• ANSI/TIA/EIA-568-B (Category 5e)
Model (Manufacturer)
SC-E5EW series (Mitsubishi Electric System & Service Co., Ltd.)
*1
Class
Class B
Class A