Technical Data - Siemens SIMATIC MOBY D System Manual

Write/read devices with RS422 interface
7.2 SLG D10S basic unit
7.2.3

Technical data

Table 7- 4
Inductive interface to the MDS
Transmission frequency
Transponders supported
Serial interface to the user
Transmission protocol
Data transmission rate
Data backup
Transmit power
Write/read distances for SLG
Software functions
Programming
Transmission protocol
Multitag
Power supply
Current consumption


Cable length for SLG S7

Digital inputs/outputs
Enclosure dimensions (L x W x H) in mm
Color
Material
Connector



SLG fixing
176
Technical data for SLG D10S basic unit
Operation
Inrush current, momentary
With RS 422
Antenna (plugs into SLG)
RS 422 interface
Power supply
13.56 MHz
Transponders according to ISO 15693 and I-
Code1
RS 422
Asynchronous 8 bit
19.2 Kbaud to 115.2 Kbaud
(depending on ASM)
CRC 16
up to 10 W
650 mm typically (see field data)
Read, write, initialize MDS
The Repeat command is not permissible.
A buffer of up to 256 bytes is available in the SLG
for concatenating commands For one command,
therefore, it is only possible to combine
commands until the sum of the header and user
data of the individual message frames does not
exceed this value. FC 45 limits the user data
length for each individual message frame to 233
bytes.
FC 45
3964R
Available soon
up to 1.4 A

2.8 A/50 ms

300 m

None
320 x 145 x 100 (without connector)
Anthracite
Aluminum
TNC connector

9-pin Sub-D connector (male)

4-pin M12 connector (male)

4 x M6 screws
System Manual, 01/2010, J31069-D0147-A6-7618
MOBY D