Removal And Installation Of Operator's Cab Assembly - Komatsu PC130-8 Shop Manual

SEN04132-01
Removal and installation of 
operator's cab assembly
Removal
k
Disconnect the negative terminal (–) of the
battery before starting the work.
1. Remove front window (1).
2. Remove step plate (2).
3. Remove floor mat (3).
4. Refer to "Removal and installation of monitor
assembly", and remove monitor assembly (4).
5. Remove covers (5) and (6).
6. Remove cover duct assembly (7).
7. Insert key (8), turn it right, and open the out-
side-air filter cover.
8. Remove outside-air filter (9).
2
50 Disassembly and assembly
9. Remove rear covers (10) to (13).
10. Remove duct (14).
11. Remove cover (15).
a Disconnect connector H15 fixed on the
back from the clip.
12. Remove plate (16).
13. Remove plate (17).
14. Remove lock pin (18) and remove duct (19).
PC130-8